Post by NothelleN340 on Jan 11, 2021 14:52:08 GMT
This is an easy one as they’re based directly on IMSA Weathertech liveries
If you’re creating your own then here’s what you need:
All these vinyls have been shared by myself. DO NOT RESIZE THEM - I can tell. If you’re painting for someone else, make sure yours match mine in size and colours
Number board x3 - one is needed each side between the wheels and one on the bonnet/hood - you can use either a green or red one, it does not matter for this race.
Numbers should be Upper Letter 1 in white, no skew, and sized at 0.20 x 0.23
Class identifier - GTLM or GTD - if you’re using a red board be sure to use the GTLM logo, this needs to be placed each side anywhere between the front and rear wheels, and one in the rear of the car. If you’re using the green board be sure to use the GTD logo, as above one each side and one on the rear. We don’t differentiate each class for this race, each colour purely depends on how you want it to look on your car
VP Racing Fuels logo x2 on each side behind or just in front of the rear wheels
Michelin logo x4 - to be placed on each corner of the car. You can use the Michelin man as well as the wording logo I’ve shared
IMSA logo - one to be placed at the front of the car, either on the bumper or on the base of the bonnet
Cut off switches - to be placed just below the windscreen
Race number - using Upper Letter 1 you must have your race number placed on the back of the car. It can be any colour or size providing it is clearly visible and does not blend in to the design of your car.
If you’re using GTLM boards then you must paint your wing mirrors and wing end plates red using these colour codes or very similar
🔴 - 0.00/1.00/1.00
If you’re using GTD boards then you must paint your wing mirror and wing end plates green
🟢 - 0.26/1.00/0.68
For extra detailing each side of the sunstrip can be painted red or green to show the class as seen on these diagrams
As this is a one off race, spending time and effort on a paint isn’t ideal for everyone. I have a few available I’m happy to share if needed, but there are many many many replicas available on the store front by searching for IMSA, GTD, GTL , Weathertech, Daytona, Sebring or particular team names. If you’re using one of these please check it matched the criteria above - some older cars may have Continental logos in place of Michelin which is fine as they were previously used. Please send some pics of the paint to me for approval if this is the case. Some may have blue number boards too which are also acceptable if it’s a download
Some cars in stock trim also have suitable paints
Audi R8 LMS
- BMW M6 GTLM
- Chevrolet Corvette C7.R
- Ferrari 458 GTC Risi 2011
- Ferrari 458 GTLM Risi 2014
If you’re creating your own then here’s what you need:
All these vinyls have been shared by myself. DO NOT RESIZE THEM - I can tell. If you’re painting for someone else, make sure yours match mine in size and colours
Number board x3 - one is needed each side between the wheels and one on the bonnet/hood - you can use either a green or red one, it does not matter for this race.
Numbers should be Upper Letter 1 in white, no skew, and sized at 0.20 x 0.23
Class identifier - GTLM or GTD - if you’re using a red board be sure to use the GTLM logo, this needs to be placed each side anywhere between the front and rear wheels, and one in the rear of the car. If you’re using the green board be sure to use the GTD logo, as above one each side and one on the rear. We don’t differentiate each class for this race, each colour purely depends on how you want it to look on your car
VP Racing Fuels logo x2 on each side behind or just in front of the rear wheels
Michelin logo x4 - to be placed on each corner of the car. You can use the Michelin man as well as the wording logo I’ve shared
IMSA logo - one to be placed at the front of the car, either on the bumper or on the base of the bonnet
Cut off switches - to be placed just below the windscreen
Race number - using Upper Letter 1 you must have your race number placed on the back of the car. It can be any colour or size providing it is clearly visible and does not blend in to the design of your car.
If you’re using GTLM boards then you must paint your wing mirrors and wing end plates red using these colour codes or very similar
🔴 - 0.00/1.00/1.00
If you’re using GTD boards then you must paint your wing mirror and wing end plates green
🟢 - 0.26/1.00/0.68
For extra detailing each side of the sunstrip can be painted red or green to show the class as seen on these diagrams
As this is a one off race, spending time and effort on a paint isn’t ideal for everyone. I have a few available I’m happy to share if needed, but there are many many many replicas available on the store front by searching for IMSA, GTD, GTL , Weathertech, Daytona, Sebring or particular team names. If you’re using one of these please check it matched the criteria above - some older cars may have Continental logos in place of Michelin which is fine as they were previously used. Please send some pics of the paint to me for approval if this is the case. Some may have blue number boards too which are also acceptable if it’s a download
Some cars in stock trim also have suitable paints
Audi R8 LMS
- BMW M6 GTLM
- Chevrolet Corvette C7.R
- Ferrari 458 GTC Risi 2011
- Ferrari 458 GTLM Risi 2014